Mikrofoner » Lavalier »
4060 CORE+ Lavalier Microphone Kit
DKK 4.050,00
Alle beløb er ekskl. moms
Ordering number:
KIT-4060-OP-LMKGTIN nr.:
5713055026301
Har du nogle spørgsmål, eller brug for vejledning?
Kontakt os på +45 3120 7021 eller info@nordicproaudio.com
Kontakt os på +45 3120 7021 eller info@nordicproaudio.com
Complete kit with mics and accessories
This kit is perfect for broadcasters, TV studios, news anchors and other public speakers.
It is a robust and unobtrusive solution; the tiny 4060 Miniature Omnidirectional Microphone, Normal SPL is placed in the smallest holder on the market where it is protected from rough handling.
This mic offers a very clean, detailed and natural sound quality. This leaves it up to the user to decide on the correct placement to achieve the desired timbre.
DPA 4060 Frequency Response:
DPA 4060 Polar Pattern:
- 1x DPA 4060 CORE+ Omni Mic
- 1x MicroLock adapter for XLR
- 1x DPA Curved Clip
- 1x Soft-boost Grid
- 1x High-boost Grid
| Directional Pattern: | Omnidirectional |
|---|---|
| Principle of operation: | Pressure gradient |
| Cartridge type: | Pre-polarized condenser |
| Frequency response: | 20 Hz - 20 kHz |
| Dynamic range: | Typ. 106 dB |
| Effective frequency range ±2 dB: | Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz. High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz |
| Sensitivity, nominal, ±3 dB at 1 kHz: | 20 mV/Pa; -34 dB re. 1 V/Pa |
| Equivalent noise level, A-weighted: | Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A)) |
| Equivalent noise level, ITU-R BS.468-4: | Typ. 35 dB (max. 38 dB) |
| Distortion, THD < 1%: | 126 dB SPL RMS, 129 dB SPL peak |
| Max. SPL, THD 10%: | 134 dB SPL peak |
| Rated output impedance: | 30 - 40 Ω |
| Cable drive capability: | Up to 300 m (984 ft) with DAD6001-BC XLR adapter |
| Power supply (for full performance): | For wireless systems Min. 5 V - max. 10 V through DPA adapter With DAD6001-BC: P48 (Phantom Power). Will work from 12 V |
| Current consumption: | Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter |
| Polarity: | Positively increasing sound pressure produces positive going voltage on MicroDot pin |
| Sensitivity selection tolerance (at 1 kHz): | ±1.5 dB |
| Microphone diameter: | 5.4 mm (0.21 in) |
| Microphone length: | 12.7 mm (0.5 in) |
| Cable length: | 1.8 m (5.9 ft) |
| Temperature range: | -40°C to 45°C (-40°F to 113°F) |
| Relative humidity (RH): | Up to 90% |