DPA 4098 CORE Supercardioid Mic, Black, MicroDot, 16 cm (6 in) Boom, full Gooseneck

Color
Length
DKK 3.990,00
All amounts are ex. VAT
Ordering number:
4098-DC-G-B00-015
GTIN number:
5713055013424
Got any questions or in the need of advice?
Please contact us on +45 3120 7021 or info@nordicproaudio.com

Speech intelligibility - low noise

DPA gooseneck microphones have quickly become a very popular choice for podium mics as well as for conference room usage as either tabletop or ceiling mount.

  • With MicroDot Connector
  • Choose between black or white
  • Outstanding audio quality
  • Wireless podium mic capability
  • Highly directional – very isolated
  • High rejection of radio frequency interference
  • Sleek Scandinavian design

With very low noise and a high sensitivity, 4098 CORE Supercardioid Microphones offer the most clear, transparent, and natural sound available on the miniature mic market. The mics are capable of handling extremely high SPL before clipping, which allows the mic to deliver high speech intelligibility even when the speaker gets excited and starts to speak VERY loudly. With a linear response, low distortion and an extremely large dynamic range, these mics sound great no matter how challenging the environment.

CORE by DPA technology has been added to the 4098 microphone, lifting sound quality even more, just like all of the other products using CORE technology. The 4098s dynamic range has been increased by 8 dB, so that the 1% THD is lifted significantly to 133 dB.

In addition, speaking into the side (off-axis) of the microphone doesn’t make the audio sound worse, it just drops the level of your voice.

DPA 4098 Frequency Response:

4098FreqRes Typical on and off-axis response of a DPA 4098

DPA 4098 Polar Pattern:

4098PolarPattern Typical directional characteristics of DPA 4098

  • 1x DPA 4098 CORE Gooseneck Supercardioid Microphone, Microdot
  • 1x Foam Windscreen
Directional Pattern:Supercardioid
Principle of operation:Pressure gradient
Cartridge type:Pre-polarized condenser
Frequency response:20 Hz - 20 kHz
Dynamic range:Typ. 110 dB
Color:Black
Length:16 cm
Connector:MicroDot
Effective frequency range ±2 dB, at 20 cm (7.9 in):MicroDot: 80 Hz - 15 kHz with 3 dB soft boost at 8-15 kHz
XLR-3M: 100 Hz - 15 kHz with 3 dB soft boost at 8-15 kHz and permanent 2nd order low-cut filter at 80 Hz
Sensitivity, nominal, ±3 dB at 1 kHz:16 mV/Pa; -36 dB re. 1 V/Pa
Equivalent noise level, A-weighted:Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
Equivalent noise level, ITU-R BS.468-4:Typ. 35 dB (max. 38 dB)
Distortion, THD < 1%:130 dB SPL RMS, 133 dB SPL peak
Max. SPL, THD 10%:135 dB SPL peak
Minimum load impedance:2 kΩ
Rated output impedance:From MicroDot: 30 - 40 Ω. From XLR connector or DAD6001-BC XLR Adapter: 100 Ω
Cable drive capability:MicroDot: Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
XLR-3M: Up to 100 m (328 ft)
Output balance principle:Signal balanced with XLR connector or DAD6001-BC XLR Adapter
Common mode rejection ratio (CMRR):> 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
Power supply (for full performance):MicroDot: Min. 5 V to max. 10 V through DPA adapter for wireless systems or
P48 (Phantom Power) with DAD6001-BC XLR adapter
XLR-3M: P48 (Phantom Power)
Current consumption:Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
Polarity:+V at MicroDot pin for positive sound pressure (and pin 2 on XLR connector or DAD6001-BC XLR adapter)
Microphone diameter:5.7 mm (0.22 in)
Microphone length:Microdot: 16 cm (6 in), 28 cm (11 in), 43 cm (17 in), 77 cm (30 in), 122 cm (48 in)
XLR-3M: 20 cm (8 in), 32 cm (13 in), 47 cm (18 in), 77 cm (30 in), 122 cm (48 in).
Temperature range:-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH):Up to 90%
DPA Foam Windscreen for 4098, Black, 5 pcs.
DPA Foam Windscreen for 4098, Black, 5 pcs.
DKK 320,00(ex. VAT)
DPA Foam Windscreen for 4098, White, 5 pcs.
DPA Foam Windscreen for 4098, White, 5 pcs.
DKK 320,00(ex. VAT)