DPA d:facto™ 4018V Softboost Supercardioid Mic, Wired DPA Handle, Black

DKK 6.700,00
All amounts are ex. VAT
Ordering number:
4018V-B-B01
GTIN number:
5713055013462
Got any questions or in the need of advice?
Please contact us on +45 3120 7021 or info@nordicproaudio.com

Excellent sonic reproduction

The d:facto™ series brings true studio sound to the live stage and broadcasting studio. This version has a pre-programmed high-end boost has a 3 dB soft boost at 12 kHz. The modular nature of the d:facto™ series allows you to switch the capsule as well as the adapter, making it the most flexible vocal microphone available on the market.

  • SOFTBOOST (4018V) Version
  • Extraordinarily natural sound
  • Perfectly uniform supercardioid directionality
  • High separation
  • Extreme SPL handling
  • Low handling noise
  • Sleek design
  • Flexible adapter system fits most professional wireless systems

Engineered especially for vocal performances onstage, the d:facto™ holds a supercardioid capsule that is designed to reproduce every nuance of the human voice transparently, consistently and thrillingly. There are two versions available. The d:facto™ Linear Vocal Microphone (4018VL) is extremely linear. The d:facto™ Vocal Microphone (4018V) is linear but with a high-end boost. The 4018V is often chosen because it ‘cuts through’ on a broadcasting set, where the content typically ends up transmitted to built-in television speakers with limited audio quality.

Besides the linearity / boost, these mics are identical. Both feature an isolation-optimized supercardioid polar pattern. This directional characteristic offers the best of two worlds – from cardioid and supercardioid patterns. These mics can handle loud vocals with three-step pop-protection grid and best-in-class low handling noise. They also offer excellent sonic reproduction with all the detail and balanced linear phase and frequency response users have grown to trust for DPA Microphones.

Optimized for live performance

d:facto™ Vocal Microphones are the ultimate stage mics – no matter if the performance is taking place in a cozy club or the largest concert hall.

Like traditional supercardioid mics, the d:facto™ series enjoys high side- and rear rejection with a minimum of 9 dB attenuation to the sides. Yet it is not bound by the less desirable aspects of the supercardioid like the uncontrolled and nonlinear rear lobes, which can create feedback from stage wedges, because there is a sudden high frequency peak at the backside of the mic.

The d:facto™ series has a wider acceptance angle at the front of the mic than most supercardioids. The acceptance angle is identical to a first-order cardioid at ±60 degrees off-center, resulting in the same work field as a cardioid — just with extremely high and uniform side and rear damping.

Linear or with a high-end boost?

When you choose your d:facto™ Vocal Microphone, you get to choose the microphone that best meets your need. An extremely linear version of the d:facto™ Vocal Microphone is engineered specifically for audio engineers who prefer setting their own unique impression on the final sound.

Both versions of the d:facto™ are designed to capture electrifying live performances and accurately replicate a singer's voice transparently, consistently and thrillingly. These mics are optimized for use in sound reinforcement as well as recording applications. They offer natural sound, high separation from nearby sound sources and SPL handling up to 160 dB.

DPA 4018V Frequency Response

4018VFR Typical on and off-axis response of a d:facto™ 4018V measured at 12 cm (4.7 in)

DPA 4018V Polar Pattern

4018VPP Typical directional characteristics of a d:facto™ 4018V

  • 1x DPA d:facto™ 4018V Softboost Supercardioid Mic, Wired DPA Handle, Black
  • 1x Microphone Clip
Directional Pattern:Supercardioid
Principle of operation:Pressure gradient
Cartridge type:Pre-polarized condenser
Frequency response:20 Hz - 20 kHz
Dynamic range:Typ. 120 dB
Effective frequency range ±2 dB, at 12 cm (4.7 in):40 Hz - 16 kHz with 3 dB soft boost at 12 kHz
Sensitivity, nominal, ±2 dB at 1 kHz:5 mV/Pa; -46 dB re. 1 V/Pa
2 mV/Pa; -54 dB re. 1 V/Pa with Adapter for wireless
Equivalent noise level, A-weighted:Typ. 19 dB(A) re. 20 µPa (max. 21 dB(A))
Distortion, THD < 1%:136 dB SPL RMS, 139 dB SPL peak
Max. SPL, THD 10%:160 dB SPL peak
Minimum load impedance:1 kΩ
Rated output impedance:100 Ω
Cable drive capability:100 m (328 ft)
Output balance principle:Impedance balancing with Active Drive
Common mode rejection ratio (CMRR):> 50 dB at 1 kHz
Power supply (for full performance):P48 (Phantom Power)
Current consumption:Max 2.0 mA
Maximum output voltage, RMS:8 V
Polarity:+V at pin 2 for positive sound pressure
Weight:309 g (10.9 oz)
Microphone diameter:52 mm (2.05 in)
Capsule diameter:19 mm (0.75 in)
Microphone length:205 mm (8.1 in)
Temperature range:-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH):Up to 90%
DPA Vocal Mic Foam Windscreen (for 4018VL and 4180V)
DPA Vocal Mic Foam Windscreen (for 4018VL and 4180V)
DKK 230,00(ex. VAT)
DPA d:facto 4018V Pop Filter
DPA d:facto 4018V Pop Filter
DKK 275,00(ex. VAT)