DPA 4188 CORE Directional Flex Headset Mic, 120 mm Boom, Black, MicroDot
Please contact us on +45 3120 7021 or info@nordicproaudio.com
Legendary sound - flexible headset
The 4188 Slim Headset Mic combines the sound of the 4088 directional capsule and a lightweight and flexible headset. It delivers sound on par with the legacy 4080 on a lightweight and flexible system.
- Headset (two ears) - Comfy and most secure option.
- Pristine audio quality
- Lightweight and flexible
- Easy mounting to the left or right
- Minimal visual impact
- Resistant to humidity
- Flexible adapter system fits most professional wireless systems
This microphone is available as an earset or headset. Earset variants are the quickest to put on and often the best choice when miking needs to be fast and easy for example for conference use. Headset variants sit more securely around the head and are ideal for active performance situations where the person wearing the headset won’t feel the presence of the microphone. Both types are ergonomically designed to fit comfortably and easily. This mic adjusts to fit any ear size and head shape while at the same time it mounts securely and is hardly visible. By rotating the boom and the earhook, the microphone can be easily used on either the left or the right ear. The connector splits the cable from the microphone boom allowing you to swap broken cables and / or wireless connectors quickly.
IP58 certified
All CORE by DPA technology microphones are IP58 certified. This durability is achieved through a number of defense mechanisms:
- Water-repellant nano-coating of the cover and housing
- Hermetic sealing of the sensitive amplifier at the core of the mic
- Dual gold plating of the diaphragm
DPA 4188 Frequency Response:
Typical on and off-axis response of DPA 4188
DPA 4188 Polar Pattern
Typical directional characteristics of DPA 4188
- 1x DPA 4188 CORE Directional Flex Headset
- 1x Makeup Filter
- 4x Foam Windscreen
- 1x Clothing Clip
- ID Rings and cover
Directional Pattern: | Cardioid |
---|---|
Principle of operation: | Pressure gradient |
Cartridge type: | Pre-polarized condenser |
Frequency response: | 20 Hz - 20 kHz |
Dynamic range: | Typ. 111 dB |
Color: | Black |
Boom Length: | 120 mm |
Connector: | MicroDot |
Effective frequency range, ±2 dB, Near field 2-3 cm (0.8 - 1.2 in): | 100 Hz - 20 kHz with 3 dB soft boost at 8 - 20 kHz |
Sensitivity, nominal, ±3 dB at 1 kHz: | 6 mV/Pa; -44 dB re. 1 V/Pa |
Equivalent noise level, A-weighted: | Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A)) |
Equivalent noise level, ITU-R BS.468-4: | Typ. 38 dB (max. 40 dB) |
Distortion, THD < 1%: | 134 dB SPL RMS, 137 dB SPL peak |
Max. SPL, THD 10%: | 144 dB SPL peak |
Rated output impedance: | From MicroDot: 30 - 40 Ω. From DAD6001-BC: 100 Ω |
Cable drive capability: | Up to 300 m (984 ft) with DAD6001-BC XLR adapter |
Output balance principle: | Signal balanced with DAD6001-BC XLR Adapter |
Common mode rejection ratio (CMRR): | > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter |
Power supply (for full performance): | For wireless systems Min. 5 V - max. 10 V through DPA adapter With DAD6001-BC: P48 (Phantom Power). Will work from 12 V |
Current consumption: | Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter |
Polarity: | +V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter) |
Electromagnetic compatibility (EMC): | Fully compatible |
Microphone diameter: | 5.4 mm (0.21 in) |
Cable length: | 1.3 m (4.3 ft) |
Cable color: | Black or beige |
Cable diameter: | 1.6 mm (0.06 in) |
Temperature range: | -40°C to 45°C (-40°F to 113°F) |
Relative humidity (RH): | Up to 90% |