Microphones » Instrumental »

DPA 4061 CORE Instrument Microphone Kit

DKK 3.800,00
All amounts are ex. VAT
Ordering number:
KIT-4061-OC-IMK
GTIN number:
5713055017873
Got any questions or in the need of advice?
Please contact us on +45 3120 7021 or info@nordicproaudio.com

Complete kit with mics and accessories

Similar to the 4060 Instrument Microphone Kit, this kit is designed to use as a close-miking solution for a wide variety of musical instruments. The 4061 Miniature Omnidirectional Microphone, Loud SPL offers a very clean, detailed and natural sound quality. This leaves it up to the user to decide on the correct placement to achieve the desired timbre. The mic can handle 144 dB peak before clipping, allowing the microphone to be used even for snare drums, guitar/bass speaker cabinets or other high SPL sound sources.

  • Extremely rugged and reliable
  • Exceptional audio quality
  • Low noise and high sensitivity
  • Large selection of accessories
  • Modular adapter system fits most professional wireless systems
  • The kit is perfect for studio use or amplification for live use.

DPA 4061 Frequency Response:

DPA4061_FreqRe

DPA 4061 Polar Pattern:

DPA4061_PolarPattern

  • 1x DPA 4061 CORE Omni Mic, Loud SPL
  • 1x Adapter for XLR
  • 1x Double Holder
  • 1x Surface Mount
  • 1x Magnet Mount
  • 2x Holder for Strings
  • 5x Foam Windscreen
  • 3x Double-sided tape
Directional Pattern:Omnidirectional
Principle of operation:Pressure gradient
Cartridge type:Pre-polarized condenser
Frequency response:20 Hz - 20 kHz
Dynamic range:Typ. 111 dB
Effective frequency range ±2 dB:Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz. High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz
Sensitivity, nominal, ±3 dB at 1 kHz:6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted:Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equivalent noise level, ITU-R BS.468-4:Typ. 38 dB (max. 40 dB)
Distortion, THD < 1%:134 dB SPL RMS, 137 dB SPL peak
Max. SPL, THD 10%:144 dB SPL peak
Rated output impedance:30 - 40 Ω
Cable drive capability:Up to 300 m (984 ft) with DAD6001-BC XLR adapter
Power supply (for full performance):For wireless systems Min. 5 V - max. 10 V through DPA adapter
With DAD6001-BC: P48 (Phantom Power). Will work from 12 V
Current consumption:Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
Polarity:Positively increasing sound pressure produces positive going voltage on MicroDot pin
Sensitivity selection tolerance (at 1 kHz):±1.5 dB
Microphone diameter:5.4 mm (0.21 in)
Microphone length:12.7 mm (0.5 in)
Cable length:1.8 m (5.9 ft)
Temperature range:-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH):Up to 90%