DPA 4099 CORE Mic, Loud SPL with Stand Mount

Instrument
DKK 3.650,00
All amounts are ex. VAT
Ordering number:
4099-DC-1-101-SM
GTIN number:
5713055015152
Got any questions or in the need of advice?
Please contact us on +45 3120 7021 or info@nordicproaudio.com

Even though the 4099 CORE is often used attached directly to a specific instrument, many users have asked for a solution to mount the mic on a regular microphone stand. Now you can get the unparalleled sound of the  4099 CORE for Loud SPL easily mounted on a mic stand.

Let your instrument choose the mic

The 4099 CORE was designed to get the best performance out of your instrument, so make sure you choose the correct version. We have created clips and mounts to fit a wide range of popular instruments. Even if your instrument is not listed below, there is probably a solution that will meet your needs.

The true voice of your instrument

The 4099 Instrument Microphone is already the recognized standard for this type of microphone and the CORE version adds just another layer of sound quality that further distances this mic from its competitors. 4099 brings more clarity and details to your music, across the entire dynamic range. Anyone looking for the very highest sound quality should choose CORE by DPA – every musician, live sound engineer and anyone else who takes pride in quality audio.

  • CORE by DPA technology inside
  • Supercardioid condenser microphone
  • Handles high SPLs
  • Superior gain-before-feedback
  • Flexible and easy mounting
  • Gentle and easy to mount on the instrument
  • Detachable cable and a versatile gooseneck extender

Both the Loud- and Extreme-SPL versions of the 4099 CORE have a supercardioid polar pattern for high rejection and superior gain-before-feedback. The mic also retains a uniform off-axis frequency response to ensure a high-energy, clear live performance. The 4099 CORE also features an enhanced shock mount design, providing excellent isolation from handling noise and rumble. Cables are available in heavy duty or lightweight versions, depending on the application – both are designed to withstand the rigors of daily use. A versatile, integrated gooseneck extender provides easy and repeatable mounting..

Now with CORE by DPA technology

CORE by DPA is a powerful new technology at the heart of DPA miniature microphones. We’ve minimized distortion. From pianissimo to forte, you will experience increased clarity and openness. Learn more about CORE by DPA.

From the piano to guitar; strings to woodwinds; brass to percussion, the 4099 Series sounds equally impressive on them all. This one microphone model can beautifully reinforce an entire orchestra. You can move the mic to another instrument; just make sure you have the right type of clip to mount it correctly.The award-winning 4099 Series gives you a much more natural sound than any clip-on microphone or pickup. This condenser microphone rejects unwanted noise and accurately captures the true voice of your acoustic instrument.

DPA 4099 - Frequency response:

4099_FR Typical on and off-axis response of a 4099

DPA 4099 - Polar Pattern

4099_PP Typical directional characteristics of a 4099

  • 1x DPA 4099 CORE Mic, Loud SPL
  • 1x Stand Mount
  • 1x Adapter for XLR DAD6001
  • 1x Extension Cable (1.8 m (5.9 ft) CM1618B00
Directional Pattern:Supercardioid
Principle of operation:Pressure gradient
Cartridge type:Pre-polarized condenser
Frequency response:20 Hz - 20 kHz
Dynamic range:Typ. 108 dB
Instrument:With Stand Mount - Loud SPL
Effective frequency range ±2 dB, at 20 cm (7.9 in):80 Hz - 15 kHz with 2 dB soft boost at 10-12 kHz
Sensitivity, nominal, ±3 dB at 1 kHz:6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted:Typ. 23 dB(A) re. 20 μPa (max. 26 dB(A))
Distortion, THD < 1%:128 dB SPL RMS, 131 dB SPL peak
Max. SPL, THD 10%:142 dB SPL peak
Rated output impedance:From MicroDot: 30 - 40 Ω. From DAD4099-BC or DAD6001-BC: 100 Ω
Cable drive capability:Up to 300 m (984 ft) with DAD6001-BC/DAD4099-BC XLR Adapter
Output balance principle:Signal balanced with DAD4099-BC or DAD6001-BC XLR Adapter
Common mode rejection ratio (CMRR):> 60 dB from 50 Hz to 15 kHz with DAD4099-BC or DAD6001-BC XLR Adapter
Power supply (for full performance):For wireless systems Min. 5 V - max. 10 V through DPA adapter
With DAD6001-BC or DAD4099-BC: P48 (Phantom Power). Will work from 12 V
Current consumption:Typ. 1.5 mA (microphone). 3.5 mA with DAD4099-BC or DAD6001-BC XLR Adapter
Polarity:+V at MicroDot pin for positive sound pressure (and pin 2 on DAD4099-BC or DAD6001-BC XLR adapter)
Sensitivity selection tolerance (at 1 kHz):±1 dB
Microphone diameter:5.7 mm (0.22 in)
Microphone length:45 mm (1.8 in)
Cable length:1.8 m (5.9 ft)
Cable diameter:1.6 mm (0.06 in) / 2.2 mm (0.09 in)
Temperature range:-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH):Up to 90%
Gooseneck length:140 mm (5.5 in)
DPA MicroDot Extension Cable, 1.6 mm, 1.8 m (5.9 ft), Black
DPA MicroDot Extension Cable, 1.6 mm, 1.8 m (5.9 ft), Black
DKK 225,00(ex. VAT)
BubbleBee The Windkiller SE for DPA 4097/4099
BubbleBee The Windkiller SE for DPA 4097/4099
DKK 360,00(ex. VAT)
DPA Foam Windscreens for 4099 CORE, 5 pcs.
DPA Foam Windscreens for 4099 CORE, 5 pcs.
DKK 270,00(ex. VAT)
DPA Shock Mount Kit for 4099
DPA Shock Mount Kit for 4099
DKK 105,00(ex. VAT)
DPA Zip case for DPA 4099 Instrument Microphones
DPA Zip case for DPA 4099 Instrument Microphones
DKK 370,00(ex. VAT)
DPA Gooseneck Lock for 4099, 5 pcs.
DPA Gooseneck Lock for 4099, 5 pcs.
DKK 105,00(ex. VAT)