DPA 4071 CORE Omni Mic, Presence Boost, Loud SPL, Black, MicroDot
Please contact us on +45 3120 7021 or info@nordicproaudio.com
The 4071 Miniature Omnidirectional Microphone, Presence Boost is a fantastic lavalier mic, which features a presence boost of typically 5 dB at 4 to 6 kHz. This is critical for a chest-placed microphone because the frequency range of the consonants spoken is damped in this position, which results in poor intelligibility. The 4071 has a boost that maximizes speech intelligibility. This microphone will be able to handle sound pressure levels up to 144 dB before clipping occurs.
- Exceptional audio quality
- Uniform, consistent sound between DPA mics
- Extremely rugged and reliable
- Diminutive size made for flexible and easy concealment
- Large selection of clips, windscreens, grids and other accessories
- Modular adapter system fits most professional wireless systems
When recording voices from mic placement on a performer's body, no frequency below 100 Hz is attractive. For this reason, an acoustical low-cut at 100 Hz has been incorporated in the 4071’s capsule so the built-in preamplifier (and the wireless system) will have a much larger headroom. Furthermore, the low-cut filter removes low-frequency rumble, noise and proximity effect.
Because of its special optimization for speech, this mic is especially appropriate for ENG news crews since very few ENG mixers have the ability to make this type of compensation. It is also a fantastic choice for in-studio reporters or even hidden under clothing for film production use.
DPA 4071 Frequency Response:
Typical response of a 4071
DPA 4071 Polar Pattern:
Typical directional characteristics of a 4071
- 1x DPA 4071 CORE Omni Mic, Presence Boost
| Directional Pattern: | Omnidirectional |
|---|---|
| Principle of operation: | Pressure gradient |
| Cartridge type: | Pre-polarized condenser |
| Frequency response: | 20 Hz - 20 kHz |
| Dynamic range: | Typ. 111 dB |
| Effective frequency range ±2 dB: | 100 Hz - 15 kHz with typ. 5 dB soft boost at 4 - 6 kHz |
| Sensitivity, nominal, ±3 dB at 1 kHz: | 6 mV/Pa; -44 dB re. 1 V/Pa |
| Equivalent noise level, A-weighted: | Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A)) |
| Equivalent noise level, ITU-R BS.468-4: | Typ. 38 dB (max. 40 dB) |
| Distortion, THD < 1%: | 134 dB SPL RMS, 137 dB SPL peak |
| Max. SPL, THD 10%: | 144 dB SPL peak |
| Rated output impedance: | 30 - 40 Ω |
| Cable drive capability: | Up to 300 m (984 ft) with DAD6001-BC XLR adapter |
| Power supply (for full performance): | For wireless systems Min. 5 V - max. 10 V through DPA adapter With DAD6001-BC: P48 (Phantom Power). Will work from 12 V |
| Current consumption: | Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter |
| Polarity: | Positively increasing sound pressure produces positive going voltage on MicroDot pin |
| Weight: | 7.5 g (0.26 oz) incl. Cable and MicroDot connector |
| Microphone diameter: | 5.4 mm (0.21 in) |
| Microphone length: | 17 mm (0.67 in) |
| Cable length: | 1.8 m (5.9 ft) |
| Temperature range: | -40°C to 45°C (-40°F to 113°F) |
| Relative humidity (RH): | Up to 90% |
Related products
