Microphones » Modular Capsules and Preamps »

DPA 4018 Supercardioid Mic Capsule

DKK 8.945,00

All amounts are ex. VAT

Ordering number:

MMC4018

GTIN number:

5713055001025

Got any questions or in the need of advice?
Please contact us on +45 3120 7021 or info@nordicproaudio.com

Description
Specifications

The MMC4018 Supercardioid Microphone Capsule is part of our selection of pencil microphones. The capsule has a highly directional supercardioid pickup pattern with a smooth and uniform off-axis frequency response. The supercardioid shape is frequency independent, securing an identical sound color around the microphone. The usual rear lobe heard on most supercardioids is minimized on this capsule. This makes it much more isolated without sudden frequency dependent peaks and dips.

Designed for a broad range of long-distance broadcast, ENG and film miking applications, such as booming, dialogue, interview and table or podium use, the MMC4018 Supercardioid Microphone Capsule offers superb flexibility through modular accessories. The mic is also ideal for use as a spot or hanging mic for orchestra recording situations.

Whats Included:

1x DPA 4018 Supercardioid Mic Capsule

Directional Pattern:	Supercardioid
Principle of operation:	Pressure gradient
Cartridge type:	Pre-polarized condenser
Frequency response:	20 Hz - 20 kHz
Dynamic range:	Typ. 121 dB
Effective frequency range, ±2 dB, at 30 cm (11.8 in):	40 Hz - 18 kHz
Sensitivity, nominal, ±2 dB at 1 kHz:	12 mV/Pa; -38.4 dB re. 1 V/Pa
Equivalent noise level, A-weighted:	Typ. 16 dB(A) re. 20 µPa (max. 19 dB(A))
Equivalent noise level, ITU-R BS.468-4:	Typ. 23 dB (correct with the attenuator in 0 dB or -20 dB setting)
Distortion, THD < 1%:	134 dB SPL RMS, 137 dB SPL peak
Max. SPL, THD 10%:	156 dB SPL peak
Switchable attenuator, filters etc.:	0 dB / -20 dB
Rated output impedance:	200 Ω
Minimum load impedance:	2 kΩ
Cable drive capability:	100 m (328 ft)
Output balance principle:	Impedance balancing with Active Drive
Common mode rejection ratio (CMRR):	> 60 dB
Power supply (for full performance):	P48 (Phantom Power)
Current consumption:	2.8 mA
Maximum output voltage, RMS:	8 V
Polarity:	+V at pin 2 for positive sound pressure
Matching tolerance (frequency response and sensitivity):	±1 dB
Phase deviation for kit:	< 10°
Microphone diameter:	19 mm (0.75 in)
Capsule diameter:	19 mm (0.75 in)
Microphone length:	170 mm (6.7 in)
Temperature range:	-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH):	Up to 90%