OUTLET & DEMO »

Manley Force - 4-Channel Microphone Preamp

DKK 9.999,00
All amounts are ex. VAT
Ordering number:
FORCE
Got any questions or in the need of advice?
Please contact us on +45 3120 7021 or info@nordicproaudio.com

DEMO unit - Only 1 in stock

  • Condition - New

High Voltage = High Headroom = High Fidelity.

From America's premier high-end studio gear manufacturer, the Manley FORCE contains four channels of real High Voltage vacuum tube microphone preamplifiers extracted from the hugely popular and award winning Manley CORE®, housed in an exquisitely gorgeous chassis, and meticulously hand-crafted in California.

Features:

  • 7-Segment LED Peak Metering
  • Selectable Gain, LOW vs HIGH
  • 120Hz High Pass Filter switch
  • Phase Invert switch
  • 48V Phantom power switch
  • Input Attenuator (Variable Pad)
  • Silent Input Level Control (Variable Input Pad)
  • 1/4" DIRECT INPUT
    • Similar to the DI in the Manley SLAM!®, and exactly the same as found in the Manley CORE®, this all-discrete solid-state circuit with 10 Meg Ohm input impedance is perfect for guitars, bass, keyboards, etc.
  • Vacuum Tubes: 4 x 12AX7WA dual triodes
  • Balanced Transformer Coupled XLR Microphone Input Impedance: 1250 Ohms
  • Unbalanced 1/4" Direct Input Impedance: 10 Meg Ohm
  • Maximum Input Mic input (Low Gain Setting): -5 dBu or 435mV RMS @ 0.5% THD
  • Maximum Input Mic input (High Gain Setting): -25 dBu or 44mV RMS @ 0.5% THD
  • Maximum Input Direct input (Low Gain Setting): +24 dBu or 12V RMS @ 0.5% THD
  • Maximum Input Direct input (High Gain Setting): +17 dBu or 5.5V RMS @ 0.5% THD
  • Maximum Output (1kHz Sine, into 100 kOhm load, 0.1% THD+N: +35 dBu
  • Maximum Output (1kHz Sine, into 100 kOhm load, 0.1% THD+N: 43V RMS
  • Maximum Output (1kHz Sine, into 600 Ohms load, 0.1% THD+N): +22 dBm
  • Hi-current WFDRIVE Balanced Output Impedance: 50 Ohms
  • Output Headroom (referenced to +4 dBu): 31 dB
  • Dynamic Range: 118 dB @ LOW GAIN, 100 dB @ HI GAIN
  • THD & Noise (1Khz @ +4dBu BW 22Hz-22KHz): 0.004% at Low Gain setting
  • THD & Noise (1Khz @ +4dBu BW 22Hz-22KHz): 0.04% at Hi Gain setting
  • Noise Floor Micpre (A WGT): - 85dB @ LOW GAIN, -66dB @ HI GAIN
  • Signal to Noise Ratio (Ref. to +4dBu): 87dB @ LOW GAIN, 68dB @ HI GAIN
  • EIN (22-22kHz BW, A WGT): -129dB with 150 Ohm source impedance @ LO GAIN
  • Frequency Response: 20 Hz to 20 kHz -0.1dB, +0.3 dB
  • Gain via Microphone Input: 40 LOW or 50dB HI GAIN (60dB available via internal jumper)
  • Gain via Line Input: 20 or 30dB (40dB available via internal jumper)
  • Low Signal Green LED (Output Level): -22 dBu
  • High Signal Red LED (Output Level): +24 dBu
  • AUTOMUTE warmup delay: 30 seconds
  • Power consumption: 36 Watts
  • Operating mains voltage: 90 to 254 VAC (internal universal supply)
  • Mains Voltage Frequency: 50~60Hz
  • Dimensions: 19" x 3 1/2" x 7" (occupies 2u)
  • Unit weight: 8.6 lbs.
  • Shipping weight: 11.8 lbs.