Audioroot Femto - Battery powered stereo mic preamp with 48V phantom power

DKK 3.893,00
All amounts are ex. VAT
Ordering number:
FEMTO
Got any questions or in the need of advice?
Please contact us on +45 3120 7021 or info@nordicproaudio.com

The AUDIOROOT FEMTO is a high quality battery powered mic preamp that was designed for location sound recording ( ENG, EFP, music, etc…). It combines in a single box a high gain – low noise microphone preamp with 48V phantom powering, a 80hz 12dB/oct high pass filter and a beautiful OLED screen for audio and battery level information display. The FEMTO was designed to resist over time and against the harshest environments. The FEMTO’s premium electronics are protected by a lightweight powder coated aluminum extruded enclosure. Markings are directly engraved on the aluminum face panels to resist over time. The AUDIOROOT FEMTO is a high gain mic preamp with a default minimum gain setting of +10dB.

  • Dual high gain/low noise mic preamp (+10 to + 64dB)
  • 48V phantom powering
  • 80hz 12dB/oct high pass filter
  • Bright OLED screen (sunlight readable)
  • 2 mic inputs on XLR3 connectors
  • Balanced line level output on XLR5 connector
  • High quality audio potentiometers
  • Superb powder coated and engraved aluminum enclosure
  • Lightweight – small footprint
  • Power efficient ( 6 hours autonomy with 2 Schoeps CMC64Ug)
  • Weight (without batteries) : 327g
  • Dimensions : 95 x 129 x 42mm (l x p x h)
  • Powering: 2 x 9V batteries (type 6LR61) or external (12-18V)
  • 1x Audioroot Femto - Battery powered stereo mic preamp with 48V phantom power
  • 1x Balanced line output cable XLR5 -> 2 x TA3F
  • Input impedance: > 5kohms
  • Min gain: 10dB
  • Max gain (Zsource = 50R, Zload =600ohms): > 64dB
  • Distorsion: 0.002% < 40dB gain / 0.006% @ 60dB gain
  • Equivalent input noise: -129.2dBu @ gain max (Zsource = 200Ohms)
  • Bandwidth: (+/- 3 dB) : 15Hz – 20kHz
  • Max ouput level (Zload = 600R, Vpower = 16V) : +18dBu
  • Power consumption – (external powering = 18V: 48V off : 44mA / 48V on + 2 Schoeps CMC6Ug : 82mA
  • Power consumption – (internal powering ): 48V off : 31mA / 48V on + 2 Schoeps CMC6Ug : 67mA
  • External power connector: Switchcraft barrel or Hirose 4 pin connector