Wisycom MCR54 - Quad channel Multiband True Diversity Receiver - B1 Band
;)
;)
Got any questions or in the need of advice?
Please contact us on +45 3120 7021 or info@nordicproaudio.com
Please contact us on +45 3120 7021 or info@nordicproaudio.com
Variant: B1: 470÷800 + 960÷1000 (UK) + 1045÷1071 MHz (UK)
The MCR54 is a camera quadruple true diversity wireless microphone receiver system in a modular stand alone or slot in configuration. It’s compatible with most camera’s slots and “multi-slot” mixer accessories.
Features:
- Four channels True Diversity receiver (8 Receiver boards!)
- Exceptional compactness and high robustness
- DSP Analogue & Digital Audio Output (AES3)
- Up to 790 MHz bandwidth in 470/1260 MHz range
- Next Gen Multiband front-end filtering:
- High Q electronically tunable filter in 470-798 MHz
- 1st narrowband filter
- 2nd narrowband filter
- Wideband and Narrowband DSP-FM operation (SW selectable):
- Narrowband allows more 50% band efficiency
- Narrowband allows about 3dB extra sensitivity and noise immunity
- Extreme low noise VCO with ultrafast spectrum scan for optimal quick & easy setup
- High contrast OLED display
- Automatic scan & transmitter programming through infrared and Bluetooth 5 long range
- DSP based for extreme flexibility and multi-companding operations
- Monitor & control through USB C or Bluetooth 5 (long range) on Wisycom Manager 2.0 (computer SW)
- Rear antenna connectors and micro audio and power adapter
- 1x Wisycom - MCR54 QUAD reciever
- Frequency ranges:
- MCR54 B1: 470 ÷ 800 + 961÷1000 + 1045÷1075 MHz (UK)
- MCR54 B2: 470 ÷ 800 + 823÷832 + 940÷960 MHz (USA/EU)
- Switchable channels - 2400 user programmable frequencies, organized in 40 groups of 60 channels
- Switching-window - up 790 MHz
- Frequencies - Microprocessor controlled frequency synthesizer circuit, with 5 kHz minimum step. The frequencies can be easily PC reprogrammed with USB C, Bluetooth 5 (long range) or optional UPKmini Programming
- Frequency error - < ± 2.5 ppm, in the rated temperature range
- Modulation - FM mono, wideband or narrowband IFB (SW selectable)
- Peak deviation:
- ±54 kHz (wideband)
- ± 40 kHz (narrowband)
- Antenna input impedance - 50 ohm sma type (SWR < 1:2; typ. 1:1.4)
- Sensitivity:
- 2 μV ( 6 dBμV), for SND/N > 58 dB;
- 5 μV (14 dBμV), for SND/N > 98 dB
- in the whole switching-windo*
- Amplitude response - < 0.5 dB (for RF input signal:6 dBµV ÷ 100 dBµV)
- Adjacent chan. Selectivity - > 80 dB typical (for channel spacing ≥ 400 kHz)
- Spurious emissions - < 2 nW (typical = 0.1 pW)
- Noise Reduction system:
- ENR / ENR-1.2 (Wisycom Extended-NR) , noise optimized
- ENC / ENC-1.2 (Wisycom Extended-NC), voice optimized & with reduced pre-emphasis
- ENS (for live application)
- Others, compatible with most systems, thru an internal DSP emulation of SA572, SA575 and Rms envelope compander chip set, fully user programmable
- AF bandwidth:
- 30 Hz ÷ 20 kHz (wideband)
- 30 Hz ÷ 17 kHz (narrowband)
- Frequency response:
- ± 1 dB in the 30 Hz ÷ 20 kHz range (wideband),
- ± 1 dB in the 30 Hz ÷ 17 kHz (narrowband)
- Distortion - 0.3 % typical
- SND/D ratio (Analogue) - 120 dB typical (RMS value, 22 Hz / 22 kHz, unweighted)
- SND/D ratio (Digital) - > 125 dB typical
- Audio output - Electronically balanced on 5 pin mini-XLR Female connector analogue or digital (SW selectable)
- Digital sample rate - AES3 @ 48 kHz
- Monitor output - Headphone 3.5 mm jack socket
- Managing interface:
- USB C
- Bluetooth 5
- LEDs:
- 2 multicolour RGB LEDs to easy indicates Power & Bluetooth
- 4 multicolour RGB LEDs to easy indicates the audio status of the 4 RX
- Display - OLED 128x64 (white)
- Powering:
- External = 6 ÷ 18 Vdc (3 W max)
- Autonomous. = with optional BCA 54 Battery Module
- Power consumption:
- 3 Watt max (with 4 active receivers)
- 2 Watt max (with 2 active receivers)
- Temperature range - -10 ÷ +55 °C
- Dimensions - 104 x 85 x 25 mm (H x W x D)
- Weight - 230g