DPA 4011 Cardioid Mic, Black, XLR, 77 cm (30 in) Boom, Floor Stand, Single Mic
![](/img/prod/4011-DF-F-B01-075.jpg)
Please contact us on +45 3120 7021 or info@nordicproaudio.com
Elegant and exclusive design
Using the MMC4011 Cardioid Microphone Capsule for its directional quality and attention to detail, this solution makes everything sounds like the original. A complete microphone floor stand solution offering a high-quality stage voice or instrument mic in an elegant and exclusive design.
- Choose between Single or Twin Mic setup
- Low noise and natural voice
- Highly directional for high isolation
- Uniform, frequency independent directionality
- Exclusive, elegant design
- Integrated shock-mounting in floor base
- Rapidly stabilizing microphone boom pole Modular flexibility
This floor stand solution has an elegant and exclusive design with a black, non-reflective surface specifically made to handle the, from time to time, rough life in TV-studios, OB-vans and onstage in theaters and concert halls. The Floor Base has an integrated shock mounting solution. The thread screw holds the Stand Extension and MMP-F Modular Active Boom. This unique design allows for a long stage microphone boom pole that does not swing, but rapidly stabilizes itself after being positioned.
These floor stand solutions can quickly, and with no tools needed, transform into a new configuration. You can combine it with another pencil mic capsule and preamplifier.
A flat on-axis frequency response and excellent phase response deliver a faithful reproduction of the original sound. The off-axis response is similarly smooth so that any leakage is an accurate reflection of the original, though attenuated according to the true first-order cardioid pickup pattern.
DPA 4011 Frequency Response:
Typical on and off-axis response of DPA 4011
DPA 4011 Polar Pattern:
Typical directional characteristics of DPA 4011
- 1x DPA 4011 Cardioid Mic, Black, XLR, 77 cm (30 in) Boom, Floor Stand, Single Mic
- 1x Foam Windscreen
Directional Pattern: | Cardioid |
---|---|
Principle of operation: | Pressure gradient |
Cartridge type: | Pre-polarized condenser |
Frequency response: | 20 Hz - 20 kHz |
Dynamic range: | Typ. 121 dB |
Length: | 77 cm |
Single or Twin: | Single Mic |
Effective frequency range, ±2 dB, at 30 cm (11.8 in): | 40 Hz - 20 kHz |
Sensitivity, nominal, ±2 dB at 1 kHz: | 10 mV/Pa; -40 dB re. 1 V/Pa |
Equivalent noise level, A-weighted: | Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A)) |
Equivalent noise level, ITU-R BS.468-4: | Typ. 25 dB |
Distortion, THD < 1%: | 136 dB SPL RMS, 139 dB SPL peak |
Max. SPL, THD 10%: | 144 dB SPL peak |
Rated output impedance: | 100 Ω |
Minimum load impedance: | 2 kΩ |
Cable drive capability: | 100 m (328 ft) |
Output balance principle: | Impedance balancing |
Common mode rejection ratio (CMRR): | > 40 dB |
Power supply (for full performance): | P48 (Phantom Power) |
Current consumption: | 3.5 mA |
Maximum output voltage, RMS: | 2.2 V |
Polarity: | +V at pin 2 for positive sound pressure |
Matching tolerance (frequency response and sensitivity): | ±1 dB |
Phase deviation for kit: | < 10° |
Microphone diameter: | 19 mm (0.75 in) |
Capsule diameter: | 19 mm (0.75 in) |
Microphone length: | Capsule: 23 mm (0.9 in), Boom poles: 20 cm (8 in), 32 cm (13 in), 47 cm (18 in), 77 cm (30 in), 122 cm (48 in) |
Temperature range: | -40°C to 45°C (-40°F to 113°F) |
Relative humidity (RH): | Up to 90% |