Microphones » Lavalier »

DPA 4062 CORE Omni Mic, Extreme SPL, Black, MicroDot

Reset selection

DKK 2.970,00

All amounts are ex. VAT

Ordering number:

4062-OC-C-B00

GTIN number:

5713055014223

Got any questions or in the need of advice?
Please contact us on +45 3120 7021 or info@nordicproaudio.com

Description
In The Box
Specifications

This 4062 Omni Mic is similar to the others in the 4060 Series, but is sensitivity adjusted to match extremely loud sound pressure levels. With the correct power source, the microphone will be able to handle sound pressure levels up to 154 dB before clipping occurs, making it ideal for close-miking drums and brass. The microphone is also the perfect choice for miking in the engine compartment of cars or directly in the exhaust pipes.

For Extreme SPL
Exceptional audio quality
Uniform, consistent sound between DPA mics
Extremely rugged and reliable
Diminutive size made for flexible and easy concealment
Large selection of clips, windscreens, grids and other accessories *Modular adapter system fits most professional wireless systems

DPA 4062 Frequency Response:

DPA4062_FreqRe Typical response of a 4062

DPA 4062 Polar Pattern:

DPA4062_PolarPattern Typical directional characteristics of a 4062

1x DPA 4062 CORE Omni Mic, Extreme SPL
1x Soft boost grid
1x High boost grid

Directional Pattern:	Omnidirectional
Principle of operation:	Pressure gradient
Cartridge type:	Pre-polarized condenser
Frequency response:	20 Hz - 20 kHz
Dynamic range:	Typ. 106 dB
Color:	Black
Effective frequency range ±2 dB:	Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz. High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz
Sensitivity, nominal, ±3 dB at 1 kHz:	1 mV/Pa; -60 dB re. 1 V/Pa
Equivalent noise level, A-weighted:	Typ. 33 dB(A) re. 20 µPa (max. 37 dB(A))
Equivalent noise level, ITU-R BS.468-4:	Typ. 45 dB (max. 49 dB)
Distortion, THD < 1%:	136 dB SPL RMS, 139 dB SPL peak
Max. SPL, THD 10%:	154 dB SPL peak
Rated output impedance:	30 - 40 Ω
Cable drive capability:	Up to 300 m (984 ft) with DAD6001-BC XLR adapter
Power supply (for full performance):	For wireless systems Min. 5 V - max. 10 V through DPA adapter With DAD6001-BC: P48 (Phantom Power). Will work from 12 V
Current consumption:	Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
Polarity:	Positively increasing sound pressure produces positive going voltage on MicroDot pin
Weight:	7.5 g (0.26 oz) incl. Cable and MicroDot connector
Microphone diameter:	5.4 mm (0.21 in)
Microphone length:	12.7 mm (0.5 in)
Cable length:	1.8 m (5.9 ft)
Temperature range:	-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH):	Up to 90%