Microphones » Lavalier »

DPA 4063 CORE Omni Mic, Loud SPL & DC, Black, MicroDot

Reset selection

DKK 2.970,00

All amounts are ex. VAT

Ordering number:

4063-OC-C-B00

GTIN number:

5713055011734

Got any questions or in the need of advice?
Please contact us on +45 3120 7021 or info@nordicproaudio.com

Description
In The Box
Specifications

The 4063 Miniature Omnidirectional Microphone, Loud SPL and Low voltage is designed for use with transmitters giving only 3V bias voltage. Some transmitters provides only 3V instead of the more common 5V. In this case, the 4063 is the right choice for such transmitters. With the correct power source, the microphone will be able to handle sound pressure levels up to 138 dB before clipping occurs.

For LOUD SPL
Exceptional audio quality
Uniform, consistent sound between DPA mics
Extremely rugged and reliable
Diminutive size made for flexible and easy concealment
Large selection of clips, windscreens, grids and other accessories
Modular adapter system fits most professional wireless systems

DPA 4063 Frequency Response:

DPA4063_FreqRe Typical response of a 4063

DPA 4063 Polar Pattern:

DPA4063_PolarPattern Typical directional characteristics of a 4063

1x DPA 4063 Omni CORE mic
1x Soft boost grid
1x High boost grid

Directional Pattern:	Omnidirectional
Principle of operation:	Pressure gradient
Cartridge type:	Pre-polarized condenser
Frequency response:	20 Hz - 20 kHz
Dynamic range:	Typ. 109 dB
Color:	Black
Effective frequency range ±2 dB:	Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz. High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz
Sensitivity, nominal, ±3 dB at 1 kHz:	6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted:	Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equivalent noise level, ITU-R BS.468-4:	Typ. 38 dB (max. 40 dB)
Distortion, THD < 1%:	132 dB SPL RMS, 135 dB SPL peak
Max. SPL, THD 10%:	138 dB SPL peak
Rated output impedance:	30 - 40 Ω
Cable drive capability:	Up to 300 m (984 ft) with DAD6001-BC XLR adapter
Power supply (for full performance):	For wireless systems Min. 3 V - max. 10 V
Current consumption:	Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
Polarity:	Positively increasing sound pressure produces positive going voltage on MicroDot pin
Weight:	7.5 g (0.26 oz) incl. Cable and MicroDot connector
Microphone diameter:	5.4 mm (0.21 in)
Microphone length:	12.7 mm (0.5 in)
Cable length:	1.8 m (5.9 ft)
Temperature range:	-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH):	Up to 90%