DPA 2006 Twin Diaphragm Omni Mic Capsule
Please contact us on +45 3120 7021 or info@nordicproaudio.com
The MMC2006 Twin Diaphragm Omnidirectional Microphone Capsule is a linear omnidirectional mic capsule. The distinctive sound is well balanced. This capsule bridges the gap between the extreme sound quality of the Pencil Microphones series and our well-known Miniature Microphones in the Lavalier and Headset series. Inside this capsule, two opposite-facing miniature capsules are custom rebuilt. They are placed into a double-diaphragm, one-capsule composition. This combines the advantages of small capsules with the lower inherent noise achieved from a larger diaphragm area. These capsules provide fast impulse response and large frequency bandwidth.
The capsules are loaded to the supreme Pencil Microphone series preamplifiers instead of the tiny miniature FET ones. This gives the sound more air and precision.
Comparisons with its big brother, the iconic MMC4006 capsule, are inevitable. The relationship between the two can be clearly heard. The MMC2000 series performs as well as more exclusive microphones. It is a premium-class mic capsule and redefines the term value for money.
The MMC2006 capsule is part of the flexible Pencil Microphone series. The MMC2006A, with the MMP-A preamplifier, is the audiophile’s choice. It provides low distortion and accurate sound. The MMC2006C, with the MMP-C compact preamplifier, offers a subtle character alteration with a bit more 'body' to the low end. The MMC2006C is also easier to position.
- 1x DPA 2006 Twin Diaphragm Omni Mic Capsule
| Directional Pattern: | Omnidirectional |
|---|---|
| Principle of operation: | Pressure gradient |
| Cartridge type: | Pre-polarized condenser, Twin Diaphragm Capsule |
| Frequency response: | 20 Hz - 20 kHz |
| Dynamic range: | Typ. 114 dB |
| Effective frequency range ±2 dB: | 50 Hz - 20 kHz with typ. 3 dB soft boost at 14 kHz |
| Sensitivity, nominal, ±2 dB at 1 kHz: | 40 mV/Pa; -28 dB re. 1 V/Pa |
| Equivalent noise level, A-weighted: | Typ. 16 dB(A) re. 20 µPa (max. 18 dB(A)) |
| Equivalent noise level, ITU-R BS.468-4: | Typ. 28 dB (max. 30 dB) |
| Distortion, THD < 1%: | 127 dB SPL RMS, 130 dB SPL peak |
| Max. SPL, THD 10%: | 146 dB SPL peak |
| Switchable attenuator, filters etc.: | 0 dB / -20 dB |
| Minimum load impedance: | 2 kΩ |
| Rated output impedance: | 200 Ω |
| Cable drive capability: | 100 m (328 ft) |
| Output balance principle: | Impedance balancing with Active Drive |
| Common mode rejection ratio (CMRR): | > 60 dB |
| Power supply (for full performance): | P48 (Phantom Power) |
| Current consumption: | 2.8 mA |
| Maximum output voltage, RMS: | 8 V |
| Polarity: | +V at pin 2 for positive sound pressure |
| Sensitivity selection tolerance (at 1 kHz): | ±1.5 dB |
| Microphone diameter: | 19 mm (0.75 in) |
| Microphone length: | 164 mm (6.5 in) |
| Temperature range: | -40°C to 45°C (-40°F to 113°F) |
| Relative humidity (RH): | Up to 90% |