Wisycom MRK16 - 16 Channels UItra-Wideband Wireless Reciever System
;)
;)
Got any questions or in the need of advice?
Please contact us on +45 3120 7021 or info@nordicproaudio.com
Please contact us on +45 3120 7021 or info@nordicproaudio.com
Modular Wireless-Microphone Receiver System
MRK16 is a modular wireless-microphone receiver system that fit up to 16 channels in a compact 19” 1RU alluminium chassis. It accepts up to 4 MCR54 receivers, providing antenna distribution, RF filtering and advanced audio routing (analogue, AES3 and Dante).
FEATURES
- Up to 16 true diversity channels in a compact 19” 1U rack (4x MCR54)
- Ultra wideband receiver system from 470 to 1260 MHz equipped with 10 automatically selected band-pass filters
- RF Over Fiber for reception without distance limits! The optional fiber module EXP3 allows to replacement of coaxial cable and antennas located miles away
- Multiple audio outputs:
- Digital (AES72&AES59)
- Dante (primary&secondary)
- Analog (2xDB25 Tascam wiring)
- Dual Area Matrix to select and combine 2 diversity zones. Antenna booster and remote control of Wisycom LFA/ADFA/BFA.
- Bluetooth 5 Long Range: Class 1 (100mW) remote control to connect Wisycom devices within a range of hundreds of meters.
- Daisy chain up to 4 racks for 64 channels in only 4U
- 5 ports manageable Gigabit Ethernet switch (ETH5 is connected to an internal SFP module for fiber data)
- Redundant (dual) power supply on XLR
- Dual Power Over Ethernet input and PoE output (PE1 optional)
- USB-C connectivity with powering (1.5A)
- 1x Wisycom MRK16
- 1x AL1265XF AC/DC Power Supply with XLR-F 4-pin connector
- Frequency ranges - 470 - 1260 MHz (full range)
- Filter selection - 10 automatically selected band-pass filters:
- 470-608 MHz
- 470-694 MHz
- 470-832 MHz
- 470-1260 MHz
- 510-608 MHz
- 510-694 MHz
- 510-832 MHz
- 510-1260 MHz
- 822-1260 MHz
- 940-1260 MHz
- Antenna connector:
- 4x BNC type female connectors for inputs
- 2x SMA type female connectors for loop
- Antenna input impedance - 50 Ohm
- Spurious emissions - < 2 nW
- Input/output gain - 1dB ± 1
- Input/cascade gain - 1dB ± 1
- IP3 - 14 dBm
- Antenna booster powering - +12 Vcc / 300 mA MAX
- Analogue audio output - 2x DB25 connectors (TASCAM)
- Digital audio output - AES59 (DB25 connector) and AES72 1M (2 RJ45 connectors)
- Dante output - Dante Primary and Secondary (2 x 1000 Base TX RJ45 Ethernet)
- Monitor output - Headphone 6.3 mm jack socket, volume adjustable with a front knob
- LED:
- 4x LEDs indication for the zone activation status (red, green, off)
- 4x LEDs indication for the booster status (red, green, off)
- 4x LEDs indication for the power supply status (red, green, blue, off)
- 1x LED indication for the MRK16 status (green, off)
- Max number of receiver slots - 4
- Max number of channels - 16 (with MCR54), 8 (with MCR54-DUAL)
- Managing interface:
- 2x 1000 Base TX RJ45 Ethernet,
- Bluetooth 5 Long Range
- USB-C and thru display menu of the 1st receiver on the right
- Powering - 10÷ 28 Vdc, 5A max, redundant DC Vdc1 and Vdc2 on XLR M-4pin
- 1: -Vdc1
- 2: +Vdc2
- 3: -Vdc2
- 4:+Vdc1
- PE1 option - Power Over Ethernet board:
- dual POE++ input on eth 2/4 (redundant pwr supply)
- POE output on eth 1 (external Wifi, Bluetooth antenna)
- Power consumption - 60W with 4 MCR54s and 4 active boosters
- Power supply output - on USB-C port to connect external device (e.g. tablet) 1.5 A max
- Temperature range - -10 ÷ +55 °C
- Dimensions - 44 x 483 x 352 mm (HxWxD)
- Weight - 4.3 Kg. with 4 MCR54s and EXP2 board, 3.30 Kg. without MCR54s